访问官网
Github
文档
论文【WGCF】连接CF WARP为服务器添加IPv4/IPv6网络
目录
- 更新信息
- 脚本特点
- WARP好处
- warp 运行脚本
- warp-go 运行脚本
- Cloudflare api
- 刷 Netflix 解锁 WARP IP 的方法
- WARP socks5 或 interface 分流模板及解锁 chatGPT 的方法
- WARP+ License 及 ID 获取
- WARP Teams 获取并用于 Linux 的方法
- WARP原理
- 鸣谢 WARP 贡献者和 CloudFlare WARP 全球站点服务状态列表
更新信息
2024.7.25 menu.sh 3.1.1 / warp-go.sh v1.2.1 1. Support using the self-built WARP API at https://www.warpapi.us.kg/?run=pluskey to generate a 1920 PB WARP+ license for upgrading to a Plus account; 2. Client lacks sufficient support for WARP+, only able to use IPv4 and not IPv6; 3. Optimize the installer to further reduce script runtime; 1. 支持使用自建 warp api: https://www.warpapi.us.kg/?run=pluskey， 生成 1920 PB WARP+ license 升级为 Plus 账户; 2. Client 对 WARP+ 支持不够，只能使用 IPv4，不能使用 IPv6; 3. 优化安装程序，进一步缩短脚本运行时间
2024.7.18 menu.sh 3.1.0 / warp-go.sh v1.2.0 1. Use self-built warp api: https://www.warpapi.us.kg/ to upgrade to Teams account, no need to prepare Token in advance, only need to enter organization, email and verification code when the script is running to complete, the efficiency is greatly increased; 2. Because the Client's settings need to be set up in the Cloudflare dashboard, which can cause the vps to lose contact if not handled properly, the Client's is not upgraded to a Teams account, and the user can look up the information to set it up on their own; 1. 使用自建 warp api: https://www.warpapi.us.kg/ ，升级为 Teams 账户，不需要提前获取 Token，只须在脚本运行的时候输入组织名、邮箱和验证码即可完成，效率大增; 2. 由于 Client 的设置需要到 Cloudflare 控制后台设置，处理不好会导致 vps 失去联系，所以 Client 并没有升级为 Teams 账户的处理，用户可自行查资料设置
历史更新 history（点击即可展开或收起）
2024.7.8 menu.sh v3.0.10 / warp-go.sh v1.1.9 1. Publish warp api, you can register account, join Zero Trust, check account information and all other operations. Detailed instructions: https://www.warpapi.us.kg/ ; 2. Scripts to update the warp api; 1. 发布 warp api，可以注册账户，加入 Zero Trust，查账户信息等所有的操作。详细使用说明: https://www.warpapi.us.kg/; 2. 脚本更新 warp api
2024.6.30 menu.sh v3.0.9 1. By multithreading, parallel processing of optimal MTU, optimal endpoint, downloading wireguard-go and installing dependencies, the script runtime is reduced by more than half; 2. Reverse proxy http://ip-api.com/json and https://hits.seeyoufarm.com with cloudflare worker for better dual-stack support and faster fetching; 3. DNS Priority: Cloudflare 1.1.1.1 > Google 8.8.8.8; 1. 通过多线程，并行处理最优 MTU，最优 endpoint，下载 wireguard-go 和安装依赖， 脚本运行时间缩短一半以上; 2. 用 Cloudflare worker 反向代理 http://ip-api.com/json 和 https://hits.seeyoufarm.com，以更好支持双栈及提升获取速度; 3. DNS 优先级: Cloudflare 1.1.1.1 > Google 8.8.8.8
2024.6.28 menu.sh v3.0.8 The official WARP Linux Client supports arm64 systems and is available in both socks5 proxy and Warp interface modes; 官方 WARP Linux Client 支持 arm64 系统， Socks5 proxy 模式 和 Warp interface 模式均可用
2024.6.2 menu.sh v3.0.7 Support CentOS 9 / Alma Linux 9 / Rocky Linux 9 system; 支持 CentOS 9 / Alma Linux 9 / Rocky Linux 9 系统
2024.5.5 menu.sh v3.0.6 / warp-go.sh v1.1.8 Support Alpine edge system; 支持 Alpine edge 系统
2024.5.1 menu.sh v3.0.5 Deal with apt library changes for Debian 10 installations of wireguard-tools; 处理 Debian 10 安装 wireguard-tools 的 apt 库变更的问题
2024.4.14 menu.sh v3.0.4 1. Alpine check and update the wget version; 2. Add a message for feedback when connect warp fails; 1. Alpine 检测并更新 wget 版本的； 2. 获取 IP 失败时增加提示信息以便反馈
2024.3.21 menu.sh v3.0.3 / warp-go.sh 1.1.7 1. Update some commands according to warp-cli; 2. Remove the github cdn; 1. 根据 warp-cli 官方更新部分命令； 2. 去掉 Github cdn
2024.2.7 menu.sh v3.0.2 To check if the WireGuard kernel module is already loaded. If not, attempt to load it and recheck; 判断系统是否已经加载 wireguard 内核模块，如果还没有则尝试加载，再重新判断
2023.12.19 menu.sh v3.0.1 / warp-go.sh 1.1.6 Add a check to see if udp is allowed, if all endpoints of WARP are unreachable, the script will abort; 增加是否允许 udp 的检测，如果 WARP 的所有 endpoint 均不能连通，脚本将中止
2023.8.22 menu.sh v3.0.0 / warp-go.sh 1.1.5 Add Github CDN; 添加 Github CDN
2023.8.15 menu.sh v3.0.0 1. Add a non-global working mode, it can be switched use [warp g], which requires a script reinstallation; 2. Support regions sanctioned by Cloudflare, such as Russia, with a shared account; 3. IPv6 only uses the preset nat64 and restores the original nameserver file when uninstalled; 1. 增加warp的非全局工作模式，可以通过 [warp g] 切换，需要重装脚本; 2. 支持被Cloudflare制裁地区，如俄罗斯，使用共享账户; 3. IPv6 only 使用预设 nat64，卸载时恢复原始 nameserver 文件
2023.7.21 menu.sh v3.0.0 beta2 1. If the system supports wireguard kernel and wireguard-go-reserved, it can be switched use [warp k], which requires a script reinstallation; 2. Support Fedora system; 3. Fix switch error caused by client version 2023.7.40-1; 1. 如果系统支持 wireguard kernel 和 wireguard-go-reserved，可以通过 [warp k] 切换，需要重装脚本; 2. 支持 Fedora 系统; 3. 修复 client 2023.7.40-1 版本导致的开关错误
2023.6.30 menu.sh v3.0.0 beta IMPORTANT: 1. Use Cloudflare official warp api to replace wgcf; 2. Use wireguard-go with reserved to replace kernel. Make Hong Kong, Los Angeles and other restricted areas use warp; The above are the works of enthusiastic user, I would like to thank this guy and warp-go author coia for their contributions on behalf of all users of this script; 3. Since the changes are too big, please ask users to reinstall, if you have any problems, please feedback, I will deal with it as soon as possible; 重要更新: 1. 全面用 Cloudflare 官方 warp api 替代 wgcf; 2. 使用 wireguard-go with reserved 替代内核。使香港，洛杉矶等受限地区使用 warp; 以上均是热心网友的作品，我谨代表本脚本的所有用户感谢这位网友和 warp-go 作者 coia 的贡献; 3.由于改动太大，请用户重新安装，如有问题请反馈，我将会尽快处理
2023.6.27 menu.sh V2.53 Wireproxy proxy mode supports warp dualstack. From now on wgcf / wireproxy / client all support dual stack; Client Proxy 模式支持 warp 双栈， 从此之后 wgcf / wireproxy / client 通通支持双栈
2023.6.21 menu.sh V2.52 1. Client proxy mode supports warp dualstack; 2. Client warp mode supports warp dualstack; 3. Speed up script startup; Thanks to Bro ⑥, WordsWorthLess, us254 and chika0801 for the guidace on the xray template; 1. Client Proxy 模式支持 warp 双栈; 2. Client warp 模式支持 warp 双栈; 3. 加快脚本启动速度; 感谢网友 ⑥哥, WordsWorthLess, us254 and chika0801 关于 xray 模板的指导
2023.6.18 menu.sh V2.51 Client supports Debian 12 (bookworm); Client 支持 Debian 12 (bookworm)
2023.5.20 menu.sh V2.50 1. Client supports IPv6 only VPS; 2. Support 4 ways to upgrade to teams account including token (Easily available at https://web--public--warp-team-api--coia-mfs4.code.run); 3. Use api to delete warp account while uninstalling; 1. Client 支持 IPv6 only VPS 安装; 2. 支持包括 token 等4种方式升级为 teams 账户 (可通过 https://web--public--warp-team-api--coia-mfs4.code.run 轻松获取); 3. 卸载的同时使用 api 删除 warp 账户
2023.5.15 Cloudflare api Thanks to badafans open source project and patient guidance. Now released in linux using the Cloudflare WARP api. badafans open source project Use method 感谢大神 badafans的开源项目及耐心指导，现发布在linux下使用的Cloudflare WARP api，badafans的开源项目 使用方法
wget -N https://gitlab.com/fscarmen/warp/-/raw/main/api.sh && bash api.sh [option]2023.5.10 warp-go V1.1.4 1. Docking the warp-go official account pool api, wiki: https://docs.zeroteam.top/apis/warp; 2. Change non-global from ipv4 only to dualstacks; 3. Fix the bug that the native IPv6 cannot login when using dualstacks; 4. Update the Best-enpoint app; 5. Change ip api; 1. 对接 warp-go 官方账户池 api，wiki: https://docs.zeroteam.top/apis/warp; 2. 非全局从ipv4 only 改为双栈; 3. 修复双栈时使用原生 IPv6 不能登陆的 bug; 4. 更新最佳 Endpoint 应用; 5. 更换 ip api
2023.3.26 warp-go V1.1.3 / menu.sh 2.49 1. Change the best Warp endpoint to standard ports [500,1701,2408,4500]; 2. Upgrade the Netflix unlocking section; 1. warp endpoint 优选改为标准端口 [500,1701,2408,4500]; 2. 升级奈飞解锁部分
2023.3.14 warp-go V1.1.2 / menu.sh 2.48 To speed up WARP, automatically find the most suitable endpoint for local use and apply it to wgcf, warp-go and client. Thanks to an anonymous and enthusiastic user for the tool; 为了提速 WARP，自动寻找最适合本机使用的 endpoint，应用在 wgcf, warp-go 和 client，感谢匿名的热心网友提供的工具
2023.3.2 warp-go V1.1.1 1. warp-go v1.0.8 is supported. Allowing custom MTU values in the configuration file /opt/warp-go/warp.conf; 2. Singbox configuration exports reseved using 3-numeric-array instead of a string; 1. 支持 warp-go v1.0.8 , 允许在配置文件 /opt/warp-go/warp.conf 自定义 MTU 值; 2. Singbox配置导出 reseved 使用三个数字的数组代替字符串
2023.2.22 Unlock chatGPT without installing warp; 不安装 warp 就能解锁 chatGPT 的方法
2023.2.7 menu.sh V2.47 Iptables + dnsmasq + ipset solution supports chatGPT. Install via the 12 option in the menu or
bash menu.sh e; Iptables + dnsmasq + ipset 方案支持 chatGPT. 安装方式: 菜单 12 选项或者bash menu.sh e2022.12.17 warp-go V1.1.0 Support OpenWrt system; 支持 OpenWrt 系统
2022.12.10 warp-go V1.0.9 1.Export wireguard and sing-box config file with [warp-go e]; 2.Teams token website change to https://web--public--warp-team-api--coia-mfs4.code.run 1. 使用 [warp-go e] 导出 wireguard 和 sing-box 配置文件; 2.获取 teams token 网站更换为: https://web--public--warp-team-api--coia-mfs4.code.run
2022.10.19 menu V2.46 / warp-go V1.0.8 Switch the IPv4 / IPv6 priority by [warp s 4/6/d] or [warp-go s 4/6/d]; 通过 [warp s 4/6/d] 或者 [warp-go 4/6/d]来切换 IPv4 / IPv6 的优先级别
2022.10.7 warp-go V1.0.7 1. Further improve the conversion function between accounts. You can even switch from one WARP+ to another; 2. Formatting code； 1. 进一步完善账户间转换功能，你甚至可以从一个 WARP+ 换到另一个; 2. 优化代码
2022.10.6 menu V2.45 1. Further improve the conversion function between accounts. You can even switch from one WARP+ to another; 2. Rebuild the account registration module; 1.
